Shree Hari Engineering

Dek System Formwork: Formwork is to be strong enough to withstand the dead and live loads, forces caused by ramming and vibration of concrete and other incidental loads imposed upon it during and after casting of concrete.

The lightweight nature of the components is perhaps the biggest advantage with horizontal panel systems. They can be moved around the site with relative ease, as compared to traditional formwork.

The System Formwork for Wall / Beam / Slab: With its function accessories, the system formwork allows the construction company to undertake any formwork.

The System Formwork consist of basic five types of parts

• System Formwork Panels
• System Joint Clamp
• Waller
• Tie Rod & Nut
• Inside corner joint
• Outside corner joint
• Filler panels nullify any error

• Quick formwork time min 50% reduction in shuttering & de-shuttering time
• Same panels can be used in the lift shaft, column, wall or climbing work
• Forming of retaining walls without special compensation
• Easy handling and few accessories for corner forming. Accessories are simple and functional
• It is very useful if the same repetitive work like highrise or same casting pattern
• High loading capacity up to 300 mm thick slab, permissible concrete 2 pressure 40kN/m

Shree Hari Engineering is very known in importing wooden beams which are normally called in construction industry as H-Beams (Timber). These beams are manufactured under stringent quality measures. This concrete support H-Beam is aunique introduction to overcome the cumbersomeand costly procurement of timber. H-Beams are designed to withstand various loads during construction activities.

The wooden flanges are made of chemically treated, seasoned timber. Using a unique finger jointing method, the webs are manufactured by joining these Flanges with boiling water-proof plywood / Timber and thus made as a monolithic timber beam. Both the flange and web is hot processed by wedge technology to makeita composite versatile section.

H-beams Are Available Sizes:

• H-20 (20 cms depth)
•  Lengths vary from 1.8m to 5.9 Mtr for H-20

Timber H-Beam for formwork is used for concrete formwork construction. H20 timber beam is widely applied in slab Formwork systems, wall formwork systems, column formwork systems, timber structures, and other temporary bearing structures.

Characteristics:

• Solid Flange : Sawed-Pine or Spruce imported From Finland, High quality spruce; High stability
• Solid web: Birch or poplar or larch plywood; High durability; High load bearing capacity
• Treated by WBP glue exterior used weather & water-proof
• Beam ends sealed: Protect from moisture & UV; Reduce damage; Increase service life
• With high standardization, universal property, Fast operation.
• Highstiffness, light weight, strong load-carrying capability.
• Low cost, recycle resource.

Shree Hari Engineering is very known in importing wooden beams which are normally called in construction industry as H-Beams (Timber). These beams are manufactured under stringent quality measures. This concrete support H-Beam is aunique introduction to overcome the cumbersomeand costly procurement of timber. H-Beams are designed to withstand various loads during construction activities.

Shree Hari Engineering is very known in importing wooden beams which are normally called in construction industry as H-Beams (Timber). These beams are manufactured under stringent quality measures. This concrete support H-Beam is aunique introduction to overcome the cumbersomeand costly procurement of timber. H-Beams are designed to withstand various loads during construction activities.

The wooden flanges are made of chemically treated, seasoned timber. Using a unique finger jointing method, the webs are manufactured by joining these Flanges with boiling water-proof plywood / Timber and thus made as a monolithic timber beam. Both the flange and web is hot processed by wedge technology to makeita composite versatile section.

H-beams Are Available Sizes:

• H-20 (20 cms depth)
•  Lengths vary from 1.8m to 5.9 Mtr for H-20

Timber H-Beam for formwork is used for concrete formwork construction. H20 timber beam is widely applied in slab Formwork systems, wall formwork systems, column formwork systems, timber structures, and other temporary bearing structures.

Characteristics:

• Solid Flange : Sawed-Pine or Spruce imported From Finland, High quality spruce; High stability
• Solid web: Birch or poplar or larch plywood; High durability; High load bearing capacity
• Treated by WBP glue exterior used weather & water-proof
• Beam ends sealed: Protect from moisture & UV; Reduce damage; Increase service life
• With high standardization, universal property, Fast operation.
• Highstiffness, light weight, strong load-carrying capability.
• Low cost, recycle resource.